Jimothy 3D Print STL Files: Download List and Printing Tips
The sudden interest in a Jimothy 3D print comes from Jimothy, an unusually shaped wild raccoon filmed in Seattle in July 2026. The animal became a viral internet favorite within days, and designers quickly published printable figures, keychains, signs and articulated variations.
This guide puts the useful downloads first. Every DOWNLOAD link points to a specific model page rather than a marketplace search page. The models have not been test-printed by 33D, so inspect the files in your slicer, read the creator notes and check the current license before printing or selling anything.
Source: Bernard Landgraf / Wikimedia Commons, CC BY-SA 3.0; adapted banner crop
Jimothy 3D print STL download list
Availability and pricing were checked on July 25, 2026. Because these listings are very new, creators may replace files, add print profiles or change licensing terms. “Free” means the model page offered a free download when checked; it does not automatically grant commercial rights.
| Model | Platform and creator | Status | Best use | Direct link |
|---|---|---|---|---|
| Jimothy Running | MakerWorld · NateStormArt | Free | Dynamic display figure based on the running pose | DOWNLOAD |
| Jimothy! | Printables · Clay Rade | Free | Compact miniature designed around a 1-inch round base | DOWNLOAD |
| JIMOTHY The Raccoon | MakerWorld · URATZ | Free | General display model with a recognizable rounded silhouette | DOWNLOAD |
| Jimothy Raccoon | MakerWorld · JackieBoiii | Free | Simple fan figure for a quick slicer test | DOWNLOAD |
| Jimothy the Raccoon | MakerWorld · Xeraj | Free | Awkward walking pose without a built-in base | DOWNLOAD |
| Jimothy the Raccoon Keychain | MakerWorld · eli_fxlrst | Free | Small accessory and fast test print | DOWNLOAD |
| Jimothy – Stay Weird Tribute Sign | MakerWorld · CHurc | Free | Freestanding multicolor sign | DOWNLOAD |
| Flexi Jimothy | MakerWorld · A&LDesign | Free | Print-in-place articulated toy or fidget | DOWNLOAD |
| Jimothy Octopus – Jimothypus | MakerWorld · CheBottaZio | Free | Humorous remix rather than a literal raccoon figure | DOWNLOAD |
| Jimothy – Colored | Printables · misas | Free | Multicolor or painted presentation | DOWNLOAD |
| Meme Raccoon Jimothy | Cults3D · ToysByAnet | Paid | Articulated keychain-style interpretation | DOWNLOAD |
Which Jimothy STL should you choose?
Best straightforward figure: Jimothy Running
NateStormArt describes this sculpt as being based on the viral running footage. That makes it one of the most recognizable choices for readers who want a display figure rather than a logo, sign or flexible remix. The complicated leg arrangement is also the part most likely to need careful support placement. Preview every layer beneath the belly and between the legs before starting a long print.
Best compact miniature: Jimothy! by Clay Rade
The Printables listing says the model is scaled for a 1-inch round base, approximately 25.4 mm. At that size, a 0.4 mm nozzle may soften the face, paws and tail. A 0.2 mm nozzle, resin printer or moderate upscale can preserve more detail. When enlarging the model, remember that doubling each dimension increases material use by roughly eight times.
Best easy display option: URATZ or JackieBoiii
These two MakerWorld entries are useful alternatives when you want a more static character model. Compare the screenshots, included files and available print profiles before choosing. A model with a wide footprint and fewer separated limbs is usually easier for FDM than a running pose with several small contact points.
Best base-free pose: Xeraj
Xeraj explicitly describes the model as an awkward walking pose supplied without a base. A separate base is not always necessary, but it can improve stability and reduce the chance of narrow feet releasing from the build plate. In the slicer, check the first-layer contact area and consider a brim if the feet are small.
Best fast gift or accessory: the keychain
The keychain version is the practical choice when a full figure would take too long. Before printing multiple copies, print one test and check the loop diameter with calipers. Small loops can become brittle when printed in PLA with only one or two extrusion lines around the hole. Increasing the size slightly or using more walls can make the ring more durable.
Best multicolor project: Stay Weird sign or Jimothy – Colored
The tribute sign uses simple color layers and is likely to be easier than painting a detailed figure. On a single-color printer, slicer pauses at selected layers can create two- or three-color results. The colored Printables version is better for an AMS, MMU or manual filament-change workflow. Confirm purge volumes and preview color changes before printing.
Best moving model: Flexi Jimothy
A flexi model should be treated differently from a static figurine. Do not add supports inside articulated gaps unless the designer requests them, because support material can fuse the joints. Use a clean first layer, correct flow calibration and enough cooling for bridges. After printing, free the joints gently instead of forcing the entire model at once.
Source: Bernard Landgraf / Wikimedia Commons, CC BY-SA 3.0
This openly licensed photograph shows a common raccoon, not Jimothy. Jimothy is a real wild animal, while the downloadable files above are independent fan-made interpretations created from viral images and videos.
Who is Jimothy?
Jimothy is the nickname given to a wild raccoon filmed near Seattle’s Ballard neighborhood on July 13, 2026. The short clip showed an animal with a compact, rounded body and shortened-looking neck. The unusual silhouette led to rapid sharing, memes and fan art, followed almost immediately by 3D-printable models.
Reports have suggested a congenital spinal deformity resembling short spine syndrome, but that is not a confirmed diagnosis. A veterinary specialist quoted by People emphasized that an examination would be necessary for certainty. The animal appeared mobile and adapted in the available footage. For this reason, it is more accurate to describe Jimothy as a raccoon with a suspected congenital spinal difference rather than claiming a diagnosed condition.
This distinction also matters for model descriptions. Designers often use words such as “cryptid,” “meme raccoon” or “short-spined raccoon” as informal labels. Those names describe the internet phenomenon, not a scientifically verified diagnosis or an official character license.
Recommended Jimothy 3D print settings
No single profile fits every file. A static miniature, a freestanding sign and an articulated keychain have different requirements. The settings below are conservative starting points for a typical FDM printer with a 0.4 mm nozzle. Always prioritize the creator’s own profile when it is available.
| Setting | Starting point | Why it matters |
|---|---|---|
| Material | PLA for figures and signs | Easy to print, stiff and suitable for indoor display pieces |
| Layer height | 0.16 mm for detail; 0.20 mm for general printing | Lower layers improve facial and fur-like surface detail |
| Walls | 3 walls | Improves legs, tails, keychain loops and thin body sections |
| Infill | 10% to 15% | Usually sufficient for decorative figures; walls matter more |
| Supports | Organic or painted supports where needed | Reduces scarring while supporting the belly, chin, tail and separated legs |
| Brim | 3 mm to 6 mm for narrow feet | Adds first-layer security without changing the model itself |
| Speed | Slow external walls and small perimeters | Helps preserve the face, paws and small limb geometry |
Source: NicolasVenturini / Wikimedia Commons, CC BY-SA 4.0
Open the chosen Jimothy file in a current slicer and inspect the complete layer preview. Pay particular attention to isolated first-layer islands, thin legs and support starts beneath the body.
Support strategy for legs, belly and tail
Most raccoon figures combine a rounded body with thin legs and a tail that may leave the build plate. This creates three predictable risks: unsupported surfaces beneath the belly, fragile contact points around the feet and visible support scars on the face or fur.
- Rotate the model in the slicer and inspect overhang colors from every side.
- Prefer organic or tree supports that touch the model at fewer points.
- Paint support only beneath genuinely unsupported sections instead of supporting the entire body.
- Keep support interfaces away from the face whenever another orientation is possible.
- Use a brim for narrow paws, but remove it carefully to avoid snapping ankles.
For the running model, splitting the figure is an advanced option if the original geometry is difficult to support. A controlled cut can let you print the body and base separately, but it introduces seams and assembly work. Do not modify and redistribute the file unless its license permits derivative distribution.
Source: David Elliott / Wikimedia Commons, CC BY 2.0
Small Jimothy details depend on stable extrusion. Partial clogs, wet filament and excessive speed can turn thin paws or ears into under-extruded, fragile sections.
Material choice: PLA, PETG or resin?
PLA
PLA is the safest default for a Jimothy 3D print. It handles small details well, needs limited enclosure control and is easy to paint. Standard PLA is appropriate for indoor figures, desk ornaments and signs. Matte PLA can hide layer lines, although some matte blends are more brittle around thin keychain loops.
PETG
PETG is useful for a keychain that will be handled frequently, but it can string more and may produce less crisp miniature detail. Dry the filament, reduce uncontrolled travel across open areas and tune retraction for your printer. PETG is not automatically better for a static display figure.
Resin
Resin can reproduce small facial features and toes more clearly, especially at miniature scale. Check that the mesh is watertight and consider hollowing only when the part is large enough to support proper wall thickness, drain holes and cleaning. Use gloves, eye protection and the ventilation procedures specified by the resin and printer manufacturers.
Source: Creative Tools / Wikimedia Commons, CC BY 2.0
Neutral gray, brown or black PLA provides an easy base for painting a raccoon figure. Multicolor models may instead benefit from a light body color plus darker mask, legs and tail sections.
Scaling and checking small features
Viral models are often uploaded quickly, and the default scale may not suit every printer. Before printing, use the slicer’s measurement tool or export dimensions and check the smallest features. A paw, ear or tail section that is thinner than two extrusion widths can be fragile or disappear entirely.
- For a 0.4 mm nozzle, aim for thin structural features to be at least about 0.8 mm to 1.2 mm where possible.
- Scale the complete model uniformly unless you intentionally want to change proportions.
- Recheck support placement after scaling; supports do not always update ideally.
- For keychains, measure the ring opening and confirm that it fits the intended split ring.
- For a base-free figure, verify that the model can stand after support removal.
Source: Hardyplants / Wikimedia Commons, CC0 1.0
A quick measurement prevents surprises. Check the printed keychain loop, base diameter and overall figure height before committing to multiple copies or a large upscale.
How to verify a new Jimothy STL before printing
- Download from the specific creator page. Avoid re-upload mirrors when the original listing is available.
- Read the license. Free download, remix permission and commercial print rights are separate questions.
- Open the file in a 3D viewer. Rotate it and check for obvious missing surfaces or unexpected internal geometry.
- Repair only when necessary. If the slicer reports non-manifold edges or holes, use the 33D 3D tools overview to find a viewer, repair tool or model finder.
- Slice at the intended size. Review every layer, support interface and color change.
- Print a small test. For keychains or flexi models, one copy reveals joint clearance and loop strength before batch printing.
For a deeper workflow, see the 33D guide on preparing 3D files for printing. Readers comparing platforms can also use the best STL file sites guide.
License and commercial-use warning
A downloadable file is not automatically public domain. Each creator controls the license attached to their model page. Some licenses permit personal printing but prohibit selling physical prints, sharing modified files or redistributing the original STL. Platform labels and creator notes can also change after publication.
Jimothy is a real animal who became a public meme, not a fictional character with a single official model library. Even so, creator copyright still applies to each sculpt. Credit the designer where requested, link to the original page when sharing a make and never upload another designer’s files to a different platform without permission.
FAQ
Where can I download a Jimothy STL file?
The direct links near the top of this guide lead to individual MakerWorld, Printables and Cults3D model pages. They include static figures, a running pose, keychains, a flexi toy, a sign and multicolor versions.
Are Jimothy 3D print files free?
Most listings in this guide were free when checked on July 25, 2026. The articulated Cults3D keychain listing was paid. Prices and download status can change, so verify the current page before downloading.
What is the easiest Jimothy model to print?
A compact static figure or flat multicolor sign is usually easier than the running pose or a flexi model. Choose a design with a wide base, limited unsupported limbs and a creator-supplied print profile.
Does a Jimothy figure need supports?
It depends on the pose. Running and walking figures may need supports beneath the belly, chin, tail or lifted legs. Flexi models are often intended to print without supports inside the joints. Follow the individual designer notes.
What layer height is best for a Jimothy figure?
Start at 0.16 mm for a detailed FDM figure or 0.20 mm for a faster general print with a 0.4 mm nozzle. Very small miniatures may benefit from a smaller nozzle or resin printer.
Can I sell Jimothy 3D prints?
Only when the specific model license permits commercial sale of physical prints. A free STL does not automatically include commercial rights. Check every creator page and retain a record of the license that applied when you downloaded the file.
Is Jimothy officially diagnosed with short spine syndrome?
No confirmed diagnosis has been publicly established. Veterinary commentary based on video suggested a congenital spinal deformity resembling short spine syndrome, while also noting that an examination would be required for certainty.
Bottom line
The best Jimothy 3D print depends on what you want to make. Choose Jimothy Running for a recognizable action pose, Clay Rade’s version for a compact miniature, the tribute sign or colored model for multicolor printing, and Flexi Jimothy for a moving toy. Whichever file you choose, inspect the exact listing, confirm the license, review thin features and supports in the slicer, then print one test before scaling up or producing multiples.